real estate company logo
real estate menu left
real estate menu right


Bombas Eléctricas



Grundfos Redi-Flo3™ Electrical Submersible Pump

The Grundfos Redi-Flo3™ Electrical Submersible Pump is ideal for the removal of polluted groundwater. Users have the capability to change the pump performance while the pump is installed in the well.
Typical applications include: environmental remediation, leachate extraction, total fluids recovery, tank-to-tank transfer, and sampling. Systems are available for your portable or dedicated pumping needs.

  • Advanced Electronics
    Permanent-magnet motors, and Grundfos’ own micro-frequency converter offer the capability to control and communicate with the pump to monitor performance and set operating parameters.
  • Permanent-Soft Start System
    The motor has a soft-start system which allows the pump to start with gradually increasing speed and with the highest possible starting torque.
  • Rugged Design
    The pump uses “floating” impellers. Each impeller has its own tungsten carbide/ceramic bearing. This design and the environmentally tough 316 stainless steel and PVDF construction provide excellent wear resistance and solids handling capability.
  • Permanent-Magnet Motor
    The motor is protected against: dry-run, overvoltage, undervoltage, overload, overtemperature virtually eliminating down time.
  • Reliable Check Valves
    Reliable built-in spring loaded check valve lets you operate the pump in a position from vertical to horizontal.

Grundfos Redi-Flo3™ Electrical Submersible Pump
Grundfos Redi-Flo4™ Submersible Sampling & Remediation Pumps

Grundfos Redi-Flo4™ submersible pumps are constructed of virgin Teflon® and stainless steel to handle the rigors of contaminated groundwater pumping. Ideal for sampling and continuous operation in remediation applications. Grundfos Redi-Flo4™ Environmental submersibles meet EPA guidelines for environmental equipment and have been proven through extensive use in the field to be the industry choice.

  • For applications in 4 inch diameter and larger wells
  • Efficient purging/remediation to depths of 524 feet
  • Flow rates of up to 45 gpm for purging and
    remediation
  • Stainless steel and Teflon® are the only materials
    used in the Redi-Flo4 submersible pump ends
  • Features built-in check valve to prevent backflow
    into the well once the pump is shut down
  • User friendly cable guard aids in the installation
    of motor lead
  • Variable speed pump applications available
  • Variable speed controller can run both Redi-Flo2® and certain 2 hp Redi-Flo4™ models.

Grundfos Redi-Flo4™ Submersible Sampling & Remediation Pumps
Grundfos Teflon® Retrofitted Submersible Pumps

These Grundfos submersible pumps are made of stainless steel and retrofitted with Teflon® to handle the rigors of contaminated groundwater pumping and continuous operation in remediation applications. Built to deliver optimum efficiency during periods of high demand, all Grundfos pumps provide low, long-term operating costs and high operating reliability regardless of the application.
Teflon® retrofitted Grundfos submersibles meet government guidelines for environmental equipment and have been proven through extensive use in the field.
4" & LARGER WELLS:
5 GPM: Descargar PDF Grundfos 5S Teflon® Retrofitted Pumps
7 GPM: Descargar PDF Grundfos 7S Teflon® Retrofitted Pumps
10 GPM: Descargar PDF Grundfos 10S Teflon® Retrofitted Pumps
16 GPM: Descargar PDF Grundfos 16S Teflon® Retrofitted Pumps
25 GPM: Descargar PDF Grundfos 25S Teflon® Retrofitted Pumps
40 GPM: Descargar PDF Grundfos 40S Teflon® Retrofitted Pumps
60 GPM: Descargar PDF Grundfos 60S Teflon® Retrofitted Pumps
75 GPM: Descargar PDF Grundfos 75S Teflon® Retrofitted Pumps
6" & LARGER WELLS:
85 GPM:
Descargar PDF Grundfos 85S Teflon® Retrofitted Pumps
150 GPM: Descargar PDF Grundfos 150S Teflon® Retrofitted Pumps
230 GPM: Descargar PDF Grundfos 230S Teflon® Retrofitted Pumps
300 GPM: Descargar PDF Grundfos 300S Teflon® Retrofitted Pumps
8" & LARGER WELLS:
385 GPM: Descargar PDF Grundfos 385S Teflon® Retrofitted Pumps
475 GPM: Descargar PDF Grundfos 475S Teflon® Retrofitted Pumps
10" & LARGER WELLS:
625 GPM: Descargar PDF Grundfos 625S Teflon® Retrofitted Pumps
800 GPM: Descargar PDF Grundfos 800S Teflon® Retrofitted Pumps
1100 GPM: Descargar PDF Grundfos 1100S Teflon® Retrofitted Pumps

Grundfos Teflon® Retrofitted Submersible Pumps
Submersible Pump Cable

Santoprene® Twisted & Jacketed Cable

Santoprene® twisted & jacketed type cable furnished in pre-cut lengths with water tight Viton® plug on one end for direct connection to Franklin motor. Stranded copper conductor, 2-wire with ground or 3 with ground.

  • For use with submersible pumps in water wells, cable is UL approved for this application
  • Suitable for hot or cold conditions, from -50°F to 200°F, 105°C dry, 75°C wet, 60°C in oil.
  • Santoprene® Thermoplastic rubber is inherently resistant to a wide variety of dissolved phase oils, solvents and chemicals.
  • Santoprene should not be used in free product applications. Please use Teflon®.


Teflon® Twisted & Jacketed Cable

Teflon® twisted & jacketed type cable furnished in pre-cut lengths with water tight Viton® plug on one end for direct connection to Franklin motor. Stranded copper conductor, 2-wire with ground or 3-with ground.

  • The construction of this pump cable exceeds the electrical and physical test parameters of UL standard 83 that covers deep well submersible pump cable.
  • Teflon® insulated and jacketed cables are routinely used for control, instrumentation and low voltage power cables in mass transportation systems, critical warning for chemical plants, nuclear facilities and various utility installations. Teflon® insulated jacketed cables are able to pass the large scale IEEE-383 flammability tests.
  • Due to the physical and electrical characteristics of Teflon® the above noted pump cable should outlive the life expectancy of the pump to which it is attached.


Submersible Pump Cable
Grundfos SQFlex Renewable-Energy Based Pumping Systems

The Grundfos SQFlex system has the ability to operate off renewable power sources, eliminating its need for line power.
The SQFlex system is equipped with the SQF submersible pump and the necessary components to operate in remote locations in a variety of applications. Power options include wind, solar, and generator.

  • High efficiency
  • Wide voltage range
  • Maximum Power Point Tracking (MPPT)
  • Dry-running protection
  • Over and undervoltage protection
  • Overload protection
  • Over-temperature protection

Grundfos SQFlex Renewable-Energy Based Pumping Systems

MATRIZ
OFICINA MONTERREY

Olmo 206 Col. Altavista
Tampico, Tam. CP. 89240
Tel. (833) 217 0966/217 2184
Av. Zaragoza #1300 Col. Centro
Edificio Kalos Piso A-1 Oficina No. 150 y 151
Monterrey N.L. CP. 64000
Tel. (81) 8345 2030/8345 2031
Copyright 2010 © Petroservicios Industriales S.A. de C.V.
 


Petroservicios Industriales© Powered by Rojo 032